HP 68302 User Manual page 211

Chapter 7: Expressions in Commands
Symbols
dat→message,s
dat→message,x32
sample\\data[1].status,d32
&data[0]
*1000
212
Display the structure element "message" pointed to by the
"dat" pointer as a string.
Display the structure element "message" pointed to by the
"dat" pointer as a 32-bit hex number.
Display the structure element "status" in the second
element of the array "data" that is in the module "sample"
as a 32-bit decimal integer.
Refer to the address of the first element of the array "data."
Does not do anything. (It displays dashes, as an indication
of a parsing error.) Note that you cannot use constants as
an address.