HP 68302 User Manual page 164

Displaying and Editing Registers
This section shows you how:
•
To display registers
•
To edit registers
To display registers
•
Choose the Window→Register command.
The register values displayed in the window are periodically updated to show
you how the values change during program execution. The decoded flag
register flags allow you to identify the register status at a glance.
When the Register window is updated, user program execution is temporarily
interrupted. To prevent the user program from being interrupted (and the
Register window from being updated), choose the RealTime→Monitor
Intrusion→Disallowed (ALT, R, T, D) command to activate the real-time
mode.
Chapter 5: Debugging Programs
Displaying and Editing Registers
165