Mapping Memory; To Map Memory - HP 68302 User Manual

Mapping Memory

This section shows you how:
•

To map memory

To map memory
1
Choose the Settings→Emulator Config→Memory Map... (ALT, S, E,
M) command.
Specify the starting address in the Start text box.
2
Specify the end address in the End text box.
3
If necessary, select the function code from the Function Code
4
drop-down list.
Select the memory type in the Type option box.
5
Choose the Apply button.
6
Repeat steps 2 through 6 for each range to be mapped.
7
Choose the Close button to exit the Memory Map dialog box.
8
You can map up to 7 address ranges (map terms). The minimum amount of
emulation memory that can be allocated to a range varies between 512 and
1024 bytes, depending on the capacity of the memory board used.
It's only necessary to specify function codes when mapping overlapping
address ranges for different memory spaces. When mapping overlapping
ranges, you can only select function codes that haven't already been selected
for previously mapped ranges.
Chapter 3: Configuring the Emulator
Mapping Memory
79