To Exit The Debugger; To Create An Icon For A Different Emulator - HP 68302 User Manual

Chapter 2: Using the Debugger Interface
Starting and Exiting the Debugger

To exit the debugger

1 Choose the File→Exit (ALT, F, X) command.
Choose the OK button.
2
This will end your Real-Time C Debugger session.

To create an icon for a different emulator

Open the "HP Real-Time C Debugger" group box, or make it active by
1
positioning the mouse in the window and clicking the left button.
2 Choose the File→New... (ALT, F, N) command in the Windows
Program Manager.
Select the Program Item option and choose OK.
3
In the Description text box, enter the icon description.
4
In the Command Line text box, enter the
5
"C:\HP\RTC\M302\B3621.EXE -T<transport> -E<connectname>"
command (if C:\HP\RTC\M302 was the installation path chosen when
installing the debugger software). The "-T" and "-E" startup options
allow you to bypass the transport and connect name definitions in
the B3621.INI file.
<Transport> should be one of the supported transport options (for example,
HP-ARPA, RS232C, etc.).
<Connectname> should identify the emulator for the type of transport. For
example, if the HP-ARPA transport is used, <connectname> should be the
hostname or IP address of the HP 64700; if the RS232C transport is used,
<connectname> should be COM1, COM2, etc.
58