HP 68302 User Manual page 443

Chapter 13: Concepts
Debugger Windows
WRITE TO ROM BREAK
Program execution has stopped due to a write to location mapped as ROM.
These types of breaks must be enabled in the emulator configuration.
ACCESS TO GUARD BREAK
Program execution has stopped due to a write to a location mapped as
guarded memory.
TRACE TRIGGER BREAK
The analyzer trigger caused program execution to break into the monitor (as
specified by selecting the Break On Trigger option in the trace setting dialog
box).
Trace Status Messages
TRACE RUNNING
The trace has been started and trace memory has yet to be filled; this could
be because the trigger condition has not occurred or, if the trigger condition
has occurred, there have not been enough states matching the store
condition to fill trace memory. Contents of the trace buffer cannot be
displayed during the TRACE RUNNING status; you must halt the trace before
you can display the contents of the trace buffer.
TRACE HALTED
The trace was halted before the trace buffer was filled. The status indicates
that the trace was halted immediately after the emulator powerup, or that the
trace was force-terminated by the user. In the TRACE HALTED status, the
analyzer displays the contents of the trace buffer before the halt in the Trace
window.
TRACE COMPLETE
The trace completed because the trace buffer is full. The results are
displayed in the Trace window.
444