Table of Contents
Advertisement
Chapter 8: Menu Bar Commands
Execution→Run to Cursor (ALT, E, C)
Execution→Run to Cursor (ALT, E, C)
Runs from the current program counter address up to the Source window
line that contains the cursor.
This command sets a breakpoint at the cursor-selected source line and runs
from the current program counter address; therefore, it cannot be used when
programs are in target system ROM.
If the cursor-selected source line is not reached within the number of
milliseconds specified by StepTimerLen in the B3621.INI file, a dialog box
appears from which you can cancel the command. When the Stop button is
chosen, program execution stops, the breakpoint is deleted, and the
processor continues RUNNING IN USER PROGRAM.
Command File Command
COM(E) address
See Also
"To run the program until the specified line" in the "Stepping, Running, and
Stopping" section of the "Debugging Programs" chapter.
236
Advertisement
Chapters
Table of Contents
