Chapter 5: Debugging Programs
Tracing Program Execution
After a captured state satisfies the trigger condition, a trace becomes
complete when trace memory is filled with states that satisfy the store and
prestore conditions.
Note
The analyzer traces unexecuted instructions due to prefetching in 68302.
Trace Window Contents
When traces are completed, the Trace window is automatically opened to
display the trace results.
Each line in the trace shows the trace buffer state number, the type of state,
the module name and line number, the function name, the source file
information, and the time information for the state (relative to the other
lines, by default).
When bus cycles are included, the address, data, and disassembled
instruction or bus cycle status mnemonics are shown.
171