Define The Timing Trigger Term "Edge 1 - HP 1660 Series Training Manual

Triggering the Oscilloscope with the Timing Analyzer

Define the Timing Trigger Term "Edge 1"

Define the Timing Trigger Term "Edge 1"
The timing analyzer can be configured to trigger on edges, or a glitch. In this
exercise, you will set the trigger term to glitch on bit 7.
Press the
1 1
Highlight the
2
Clear Trigger
Select
Highlight the base field below
3
Highlight
Highlight the field to the right of
4
Using the arrow key, move the cursor to highlight the asterisk in the
5
pop-up menu for bit 7. Press the
The asterisk tells the analyzer to look for a glitch on bit 7 of the counter.
Edge 1
Bit 7
Defining Timing Trigger Terms Edge 1
Result
The term "Edge 1" is defined as a glitch on bit 7.
8-10
Trigger MENU key.
field, and press the
Modify Trigger
, press the Select key, then highlight
key.
Binary in the pop-up menu, and press the
Get other manuals https://www.bkmanuals.com
key. Highlight
Select
All , and press the
, and press the
TCOUNT Select
Select
Edge 1 , and press the Select
Done key.
key.
key.
key.