HP 68302 User Manual page 490

Step 2. Install the firmware update utility
The firmware update utility and emulation and analysis firmware require
about 1.5 Mbytes of disk space.
Start MS Windows in the 386 enhanced mode.
1
Insert the HP 64700 EMUL/ANLY FIRMWARE Disk 1 of 2 into floppy
2
disk drive A or B.
3 Choose the File→Run... (ALT, F, R) command in the Windows
Program Manager. Enter "a:\setup" (or "b:\setup" if you installed the
floppy disk into drive B) in the Command Line text box.
Then, choose the OK button. Follow the instructions on the screen.
You will be asked to enter the installation path. The default installation path
is C:\HP64700.
Chapter 15: Installing/Updating HP 64700 Firmware
Step 2. Install the firmware update utility
491