HP 68302 User Manual page 147

Chapter 5: Debugging Programs
Using Breakpoints and Break Macros
To list the breakpoints and break macros
•
Choose the Breakpoint→Edit... (ALT, B, E) command.
The command displays breakpoints followed by break macro commands in
parentheses.
The Breakpoint Edit dialog box also allows you to delete breakpoints and
break macros.
To set a break macro
Position the cursor on the line where you wish to set a break macro.
1
2
Choose the Breakpoint→Set Macro... (ALT, B, M) command.
Select the Add Macro check box in the Breakpoint Edit dialog box.
3
Specify the macro command in the Macro Command text box.
4
Choose the Set button.
5
To add another macro command, repeat steps 4 and 5.
6
To exit the Breakpoint Edit dialog box, choose the Close button.
7
The debugger automatically executes the specified macro commands when
the break macro line is reached.
To add macro commands after an existing macro command, position the
cursor on the macro command before choosing Breakpoint→Set Macro...
(ALT, B, M).
148