HP 68302 User Manual page 269

Chapter 8: Menu Bar Commands
Trace→Trigger Store... (ALT, T, T)
Trigger
NOT
Address
End Address
Data
Status
trigger start
trigger center
trigger end
Store
OK
Cancel
Clear
Load...
Save...
270
This box groups the items that make up the trigger
condition.
Specifies any state that does not match the Address, Data,
and Status values.
Specifies the address portion of the state qualifier.
Specifies the end address of an address range.
Specifies the data portion of the state qualifier.
Specifies the status portion of the state qualifier.
Specifies that states captured after the trigger condition be
stored in the trace buffer.
Specifies that states captured before and after the trigger
condition be stored in the trace buffer.
Specifies that states captured before the trigger condition
be stored in the trace buffer.
This box groups the items that make up the store condition.
Starts the specified trace and closes the dialog box.
Cancels the trace setting and closes the dialog box.
Restores the dialog box to its default state.
Opens a file selection dialog box from which you select the
name of a trace specification file previously saved from the
Trigger Store Trace dialog box. Trace specification files
have the extension ".TRC".
Opens a file selection dialog box from which you select the
name of the trace specification file.