HP 68302 User Manual page 432

Device Register Dialogs
When a register has bit-fields, a dialog will pop-up and the register value may
be edited by changing the whole value or by editing individual bit-fields.
When editing in the dialog box, a carriage-return is the same as choosing the
OK button. To end an edit of a field within the dialog box without quitting,
use the Tab key.
Edited Value Shows the register value that corresponds to the selections
made below. You can also change the register's value by
modifying the value in this text box.
Original Value Shows the value of the register when the dialog box was
opened. If the register could not be read, 'XXXXXXXX' is
displayed.
OK Modifies the register as specified, and closes the dialog box.
Cancel Closes the dialog box without modifying the register.
Chapter 13: Concepts
Debugger Windows
433