Table of Contents
Advertisement
Configuring the HP Processor Probe for PowerPC 603/603e
General Configuration Items
Setting BNC trigger out operation
The cf trigout command selects the operation of the Trigger Out BNC on the
front of the HP processor probe for connection to a logic analyzer.
cf trigout=fixhigh
The BNC output is always high.
cf trigout=fixlow
The BNC output is always low.
cf trigout=monlow
The BNC output will be low when the processor is stopped and high when
running user code.
cf trigout=monhigh
The BNC output will be high when the processor is stopped and low when
running user code.
Default: cf trigout=fixhigh
45
Advertisement
Table of Contents
