Daikin RXQ12AHR Service Manual page 118

Field Settings for Indoor Unit
Mode First Description
No. Code
(2) No.
Direct duct connection (when the
indoor unit and Heat Reclaim
2 (5)
Ventilator are connected by duct
directly.)
15 (25)
Drain pump and humidifier
3
interlock selection
Selection for individual ventilation
5
setting by remote controller
Display of error codes on the
4
remote controller
Key-lock pattern settings
1b 12
Setting restricted/permitted of
14
airflow block
1c 0 Room temperature display
Note(s)
1. Settings are made simultaneously for the entire group, however, if you select the mode No.
inside parentheses, you can also set by each individual unit. Setting changes however
cannot be checked except in the individual mode for those in parentheses.
2. The mode numbers inside parentheses cannot be used by wireless remote controllers, so
they cannot be set individually. Setting changes also cannot be checked.
3. Do not make settings other than those described above. Nothing is displayed for functions
the indoor unit is not equipped with.
4. 88 or Checking the connection. Please stand by. may be displayed to indicate the remote controller is
resetting when returning to the normal mode.
5. If the setting mode to "Equipped", heat reclaim ventilation fan conducts the fan residual
operation by linking to indoor unit.
6. Available for setting when option with the built-in human detection and floor temperature
detection function is mounted.
7. Factory setting for round flow type is 04.
112
Second Code No.
01
Not equipped Equipped
Not interlocked Interlocked
— (Normal) Individual
— Two-digit display
No operation No operation
allowed (Cancel allowed (Cancel
procedure is procedure is not
displayed.) displayed.)
Not displayed Displayed
02 03
—
—
—
—
No menu
operation is
allowed (Cancel
procedure is
displayed.)
Refer to page 125.
—
Part 5 Field Settings and Test Operation
SiAF341904E
04
—
—
—
Four-digit
display
No menu
operation is
allowed any
time.
—