Daikin RXQ12AHR Service Manual page 74

Address Setting for Wireless Remote Controller
Setting for wireless remote controller (BRC4M151W16)
The address for the wireless remote controller is set to 1 at the factory. To change the setting,
proceed as follows:
1. Hold down the FILTER SIGN RESET button and the INSPECTION button for at least 4
2. Press the SELECT button and select a multiple setting (A/b). Each time the button is
3. Press the TEMP buttons to set the address.
4. When the RESERVE button is pressed, the setting is confirmed and the usual display
68
seconds to get the Field Setting mode.
(Indicated in the display area in the figure.)
pressed the display switches between A and b.
Address can be set from 1 to 6, but set it to 1-3 and to same address as the receiver. (The
receiver does not work with address 4-6.)
returns.
Address
Multiple setting
4
1
SiAF341904E
3
2
Part 3 Remote Controller