Operation Control Mode - Daikin RXQ12AHR Service Manual

Field Settings for Indoor Unit
1.5

Operation Control Mode

The operation control mode is compatible with a variety of controls and operations by limiting
the functions of the operation remote controller. Furthermore, operations such as remote
controller ON/OFF can be limited in accordance with the combination conditions. (Refer to
information on the next page.)
Central remote controller is normally available for operations. (Except when centralized monitor
is connected)
Contents of Control Modes
20 modes consisting of combinations of the following 5 operation modes with temperature and
operation mode setting by remote controller can be set and displayed by operation modes 0
through 19.
 ON/OFF control impossible by remote controller
Used when you want to turn ON/OFF by central remote controller only.
(Cannot be turned ON/OFF by remote controller.)
 OFF control only possible by remote controller
Used when you want to turn ON by central remote controller only, and OFF by remote controller
only.
 Centralized
Used when you want to turn ON by central remote controller only, and turn ON/OFF freely by
remote controller during set time.
 Individual
Used when you want to turn ON/OFF by both central remote controller and remote controller.
 Timer operation possible by remote controller
Used when you want to turn ON/OFF by remote controller during set time and you do not want
to start operation by central remote controller when time of system start is programmed.
126
SiAF341904E
Part 5 Field Settings and Test Operation