Troubleshooting by Error Code
5.13 Transmission Error (between Indoor Unit PCB and Auto
Grille Control PCB)
Applicable
FXFSQ (when auto grille panel BYCQ125EASF is installed)
Models
C1-06
Error Code
Method of Error
The status of communication between the indoor unit PCB (X70A) and the auto grille control
Detection
PCB (X12A) is checked with the microcomputer.
Error Decision
When transmission communication between the indoor unit PCB and the auto grille control PCB
Conditions
is not normally performed for a certain period or time or more.
Supposed
Defective connection of the transmission communication connector between the indoor unit
Causes
Defective indoor unit PCB
Defective auto grille control PCB
External factors (e.g. noise)
204
PCB and the auto grille control PCB
SiAF341904E
Part 6 Service Diagnosis