Details Of Field Settings For Indoor Unit - Daikin RXQ12AHR Service Manual

Field Settings for Indoor Unit
1.4

Details of Field Settings for Indoor Unit

1.4.1 Filter Cleaning Sign Interval, Filter Type
When the setting 10 (20)-3 is set to 01 (Displayed), filter cleaning sign is displayed on the
remote controller after a certain period of operation time. This setting is used to change the
display interval of filter cleaning sign when the filter contamination is heavy.
The filter cleaning sign interval is determined as follows depending on the combination of Mode
No. 10 (20)-0 and 10 (20)-1.
Filter cleaning sign interval
Setting
Model
1.4.2 Thermistor Selection
Select a thermistor to control the room temperature.
 When the unit is not equipped with an infrared floor sensor:
10 (20)
The factory setting for the Second code No. is 01 and room temperature is controlled by the
suction air thermistor for indoor unit and remote controller thermistor. When the Second code
No. is set to 02, room temperature is controlled by the suction air thermistor. When the Second
code No. is set to 03, room temperature is controlled by the remote controller thermistor.
114
10 (20)-1
Filter contamination
heavy/light 10 (20)-0
FXFSQ-AR
FXMQ-PB
FXMQ-AR
FXAQ-P
Mode First Second
No. Code No. Code No.
01
2
02
03
36
34
32
30
28
26
24
22
20
17
01: Long life filter
Light Heavy
01
2,500 hrs. 1,250 hrs.
200 hrs. 100 hrs.
Remote controller thermistor and suction air thermistor
Suction air thermistor in indoor unit
Remote controller thermistor
In cooling
Suction air Remote controller
thermistor thermistor
Suction air
Remote controller
thermistor
thermistor
19 21 23 25 27 29
Suction air temperature (˚C)
: Factory setting
02: Ultra long life filter
Light
02 01
10,000 hrs.
200 hrs.
: Factory setting
Contents
in indoor unit
Suction air
thermistor
Suction air
thermistor
31 33 35 37
Part 5 Field Settings and Test Operation
SiAF341904E
Heavy
02
5,000 hrs.
100 hrs.