Table of Contents
Advertisement
Figure 5-1: Jumper Settings for Serial Port Configurations
5.3.
UPGRADING THE FIRMWARE
5.3.1. Overview
The SDI Time Code Master contains firmware in a FLASH ROM device. From time to time firmware
updates may be provided to add additional features to the unit. The following procedure will allow you
to upload new firmware from your computer.
You will need the following equipment in order to update the Firmware:
•
PC with available communications port. The communication speed is 19200 baud. A 486 PC or
better with a 16550 UART based communications port is recommended.
•
"Straight-thru" serial extension cable (DB9 female to DB9 male) or (DB25 female to DB9 male)
•
Terminal program that is capable of Xmodem file transfer protocol. (such as HyperTerminal)
•
New firmware supplied by Evertz.
TECHNICAL DESCRIPTION
RS-422
RS-422
TRIBUTARY
CONTROLLER
Revision 1.5.1
Model 8010TM SDI Time Code Master Manual
RS-232 DCE
RS-232 DTE
Page 5-3
Advertisement
Table of Contents
