Table 4-10: Reader Modes - evertz 8010TM Instruction Manual

60 Sense RDR Assignment
40 Select RDR Assignment
61 Sense RDR Mode
41 Select RDR Mode
Reader modes set according to the following values.
64 Sense RDR Display
44 Select RDR Display
65 Sense Broadcast Mode
45 Define Broadcast Mode
GT
Each bit represents a variable length block of data that is requested. Time and User Bits are formatted
according to the Select RDR Mode command above. The broadcast data blocks are assembled in the
following order:
SERIAL PROTOCOL
1 byte
Rdr No
Rdr No
+ 1 byte
MODE
1
2
3
4

Table 4-10: Reader Modes

Rdr No.
Rdr No. + 1 byte
1 byte
--- VTRU LTRU
LTRT LTRU VTRT
Revision 1.5.1
Model 8010TM SDI Time Code Master Manual
Returns 1 byte as defined below
Selects the Reader assignment
01 = LTC
02 = VITC
03 = Auto LTC/VITC –equal priority
04 = Auto LTC/VITC –LTC priority
05 = Auto LTC/VITC –VITC priority
Returns 1 byte as defined below.
Selects the mode of the reader.
DESCRIPTION
TIME UB
TIME DATA
TIME TIME
TIME DATE
DATA DATA
Returns 1 byte as defined below
Selects whether the look ahead
processing will be applied to the
reader display.
00 = Processed
01 = Direct
Returns 1 byte as defined below
Defines a block of data which will be
sent in broadcast mode, and in
response to a Sense Broadcast
Block command.
GU --- VTRT
VTRU GT
LTRT
GU
Page 4-11