1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing
3. Select Position to Element by pressing
The following screen is displayed:
Set Destination
↑ Increase
↓ Decrease
4. Select the element address where you want to position the CHM by pressing
↓
, then Enter.
The CHM moves in front of the element index you indicate. The system displays a
message similar to the following when the move is complete.
POSITION TO 3:
Status:
5. To run the test again with a different element index, press Escape to return to the
Diagnostics Menu, then repeat steps 4 and 5.
To abort the Position to Element diagnostic, press Escape and Enter.
7.4.3.3
Park Test
The Park test moves the CHM to the end of the long axis, called the park position.
1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing
3. Select Park by pressing
To abort this diagnostic, press Escape and Enter.
7.4.3.4
Move Cartridge Test
The Move Cartridge test picks a cartridge from one element index and moves it to
another.
↓
Complete
↓
↓
↑
or
, then Enter.
↓
↑
or
, then Enter.
↓
↑,
or
then Enter.
↓
↑
or
, then Enter.
0
↓
↑
or
, then Enter.
↓
↑
or
, then Enter.
Chapter 7
Tape Library Menu Functions
↑
or
7-17