Forth Diagnostics; Running The Forth Diagnostics; Test <Alias Name>, Test <Device Path - Sun Microsystems SPARCstation 4 Service Manual

D
A P P E N D I X

FORTH Diagnostics

This appendix explains FORTH Diagnostic tests. The following topics and tests are
described.
"Running the FORTH Diagnostics" on page 1
"test <alias name>, test <device path>" on page 3
"test-all" on page 3
"watch-clock" on page 3
"watch-net, watch-aui, watch-tpe, and watch-net-all" on page 4
"probe-scsi, probe-scsi-all" on page 6
"module-info" on page 7
"test-memory" on page 7
"Returning to the Old-Style Sunmon Compatibility Mode Prompt" on page 8
You have access to a number of additional tests in the boot PROM called FORTH
Diagnostics. To invoke these tests, you must enter the FORTH Monitor.
Caution – To run the FORTH Diagnostics, you must halt the system in an orderly
manner. When the operating system or any other standalone program has already
booted, do not press Stop-a to halt the system. Abruptly aborting program execution
may cause damage to data files.
D.1

Running the FORTH Diagnostics

1. Save all your work and quit all applications.
Consult your software documentation for instructions on ending a work session and
saving your files.
2. If you are using an X terminal, click on the Halt button in the Terminal Controls
Panel, and go to Step 1.
D-1