3. Select Cycle Solenoid by pressing
The system displays the following screen:
Set Cycles
↑ Increase
↓ Decrease
4. Select the number of cycles, in increments of ten, (up to 250) you want the Cycle
Solenoid test to run by pressing
You will hear a clicking sound.
To abort this diagnostic, press Escape and Enter.
7.5
Library Information Menu
The Library Information Menu consists of the following submenus:
SCSI Menu
Statistics
System Sensors
Command History
Inventory Menu
Drive Info Menu
7.5.1
SCSI Menu
The SCSI Menu consists of the following submenus:
SCSI Mode Parameters
SCSI Reservations
SCSI Sense Data
↓
↑
or
, then Enter.
10
↑
↓
or
, then Enter.
Contains SCSI mode parameters, reservations, and sense
data.
Contains data about CHM operations and elements.
Contains information about the mechanical sensors.
Displays the contents of the history buffer.
Contains information about bar code labels and elements.
Displays the drive status.
Displays data the library reports in response to a mode
sense command.
SCSI reservations is not supported on Sun systems.
SCSI sense data is not supported on Sun systems.
Chapter 7
Tape Library Menu Functions
7-23