Table of Contents
Advertisement
2
C H A P T E R
Preparing the Tape Library for
Installation
This chapter contains information on how to prepare the tape library for installation.
2.1
Unpacking the Tape Library
Caution – The tape library shipping weight is approximately 92 pounds (41.73 kg).
!
Use two or more people to unpack and install the tape library.
Unpacked the tape library and check the contents against the packing slip to make
sure you have the following items:
A Sun StorEdge L400 tape library with one or two tape drives installed
Two power cords
SCSI cable (2 meters)
Removable tape cartridge holder
One data tape cartridge
Cover for cartridge holder
Cleaning cartridge
Regulated SCSI terminator
Accessory kit, containing:
SCSI bus jumper blocks (2 each)
Clean wipes
Door key
2-1
Advertisement
Table of Contents
