Security Options For The Tape Library; Enabling Or Disabling Security - Sun Microsystems StorEdge L400 Installation And User Manual

6.6

Security Options for the Tape Library

The tape library features a security option that prevents users from inadvertently
changing important settings and operations. When security is enabled, access to the
following LCD activities is prevented:
Changing the control mode
Changing the SCSI IDs
Changing the library serial number
Changing SCSI parity checking
Using the Diagnostics Menu and the Demo Menu
Using the Clean Drives Menu
Opening the front door (LCD security only)
Communicating with a tape drive across a serial port
If a user attempts to perform any of the above operations when security is enabled,
the Main Screen displays a message that states security is active. The message also
states whether security was enabled through the LCD or SCSI.
Note – Security remains in effect even after you reset the tape library.
6.6.1

Enabling or Disabling Security

1. Select the Configuration Menu by pressing
2. Select Set Security On/Off (depending whether security is already on or off)
by pressing
3. Select a three digit password.
To disable security, enter the same password used to turn security on.
a. Move from column to column by pressing
b. Change the password (default password is 000) by pressing
c. Press Enter to make the password active.
Note – If you forgot the password, try entering the default password - 000.
6-8 Sun StorEdge L400 Installation and User's Guide • April 1998
↓ ↑
or , then Enter.
↓ ↑
or , then Enter.
← →
or .
↑
or
↓
.