3. Change each digit by pressing
←
→
or
The following screen displays:
The serial number is
NNNNNN.
ENTER to accept or
ESC to cancel.
4. Press Enter to save the changes or Escape to cancel the changes.
7.3.10
Use Mammoth
Allows you to check whether an Exabyte Mammoth drive is installed. This option is
factory set.
1. Select the Configuration Menu by pressing
2. Select Use Mammoth by pressing
3. Select mammoth by pressing
4. Press Enter to save the changes or Escape to cancel the changes.
7.4
Maintenance Menu
The Maintenance Menu consists of the following submenus:
Clean drive menu
Demo menu
Diagnostics menu
7.4.1
Clean Drive Menu
To clean the tape drives, see Section 8.2, "Cleaning Tape Drives."
7-12
Sun StorEdge L400 Installation and User's Guide • April 1998
.
Press
↑
↓
or
. Move from column to column by pressing
↓
↑
or
↓
↑
or
, then Enter.
↑
↓
or
.
, then Enter.