Iq7Plus-72-E-Acm-Int And Iq7Plus-72-Acm-Int Microinverter Specifications - enphase IQ7 Installation And Operation Manual

Integrated DC disconnect
Integrated AC disconnect
3 Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area.
IQ7PLUS-72-E-ACM-INT and IQ7PLUS-72-ACM-INT Microinverter
specifications
Topic
Commonly used module pairings
Peak power tracking voltage
Operating voltage range
Maximum input DC voltage
Minimum/maximum start voltage
Maximum DC input short circuit current (module lsc)
Overvoltage class DC port
DC Port backfeed under single fault
PV array configuration
Maximum continuous AC output power (-40°C to
65°C)
Rated output apparent power
Peak output power
Power factor (adjustable)
Nominal AC output voltage range
230 VAC (single-phase)
Nominal output current
230 VAC (single-phase)
Rated AC output current
29
Enphase IQ7-60-ACM-INT Microinverter parameters
IQ7PLUS-72-E-ACM-INT and IQ7PLUS-72-
ACM-INT Microinverter parameters
DC parameters
4
AC parameters
5
© 2023 Enphase Energy Inc. All rights reserved.
IQ Microinverters for AC Module applications
The DC connector has been evaluated and
approved for use as the load-break disconnect.
The AC connector has been evaluated and
approved for use as the load-break disconnect.
Unit Min
W
V 27
V 16
V
V 22
A
A
1x1 ungrounded array; No additional DC side
protection required; AC side protection requires
max 20 A per branch circuit
VA
VA
VA
0.8 leading
0.8 lagging
Vrms 184
Arms
A
Typical Max
235−350+
45
60
60
60
15
II
0
290
290
295
276
1.26
1.26
June 2023
USM-00001-1.0