Enphase System - enphase IQ8X Installation And Operation Manual

Enphase system

The Enphase system includes:
•
IQ8MC, IQ8AC, IQ8HC, and IQ8X Microinverters: The smart, grid-ready IQ8 Series Microinverters that
convert the DC output of the PV module into grid-compliant AC power.
•
IQ Gateway (ENV-IQ-AM1-240, ENV2-IQ-AM1-240): Is required to monitor solar production, propagate a
grid profile to the microinverters, and provide microinverter control at sites where power export limitation
(PEL), and/or phase imbalance management (PIM) is required through advanced grid functionalities. The IQ
Gateway is a communication device that provides network access to the PV array. The IQ Gateway collects
production and performance data from the Enphase IQ Microinverters over on-site AC power lines and
transmits the data to Enphase App through a broadband or cellular connection. The IQ Gateway can monitor
up to 600 Enphase IQ Microinverters and up to 39 IQ Batteries.
NOTE: All installations require that you use the IQ Gateway to commission the Microinverters to
propagate correct grid profile settings. This will also ensure that the microinverter's firmware is
upgraded whenever a newer version is available.
•
Enphase Installer Platform: A web-based monitoring and management software. Installers can use
Enphase Installer Platform to view detailed performance data, manage multiple PV systems, and
remotely resolve issues that might impact system performance.
Find out more at enphase.com/enlighten.
•
Enphase Installer App: A mobile app for iOS and Android devices. It allows installers to configure the
system on-site, eliminating the need for a laptop and improving installation efficiency. You can use the
app to:
o
Connect to the IQ Gateway over a wireless network for faster system setup and
verification.
o View and email a summary report that confirms a successful installation.
o
Scan device serial numbers and sync system information with the Enphase Installer Platform.
•
IQ Battery: Offers energy storage solutions.
•
IQ Field Wireable Connectors (Q-CONN-10F and Q-CONN-10M): Make connections from any IQ
Cable or open IQ Field Wireable Connector.
This manual describes the safe installation and operation of the IQ8 Series Microinverters.
NOTE: To ensure optimal reliability and to meet warranty requirements, Enphase microinverters must be
installed according to the instructions in this manual.
9
IQ8MC, IQ8AC, IQ8HC, and IQ8X Microinverters Installation and Operation Manual
© 2023 Enphase Energy Inc. All rights reserved. November 2023
USM-00008-2.0