Disassembling The Screw Cap With The Membrane Holder - Husqvarna FC 350 2014 Repair Manual

6
FORK, TRIPLE CLAMP
Disassembling the screw ca� with the membrane holder
Info
The steps are identical for both fork legs.
-
Remove the piston ring from the piston.
200859-10
-
Remove compression shim stack
-
Remove spring@.
-
Remove tap rebound @.
-
Remove spring
-
Remove the valve with the spring from tap rebound
-
Remove the 0-rings.
200862-10
Preparatory work
-
Disassemble the fork legs. (- p. 16)
-
Disassemble the cartridge. (- p. 19)
Main work
-
Clamp the screw cap with the membrane holder and the special tool into a vise.
I
Guideline
Use soft jaws.
I
Pin wrench (T103) (- p. 228)
Info
Only tighten the vise lightly.
-
Remove compression holder
(D.
@)
with the sleeve.
0-
22
fD.