Husqvarna FE 350 2015 Repair Manual page 74

EXHAUST
10
-0
Main work
(FE EU/AU)
-
Remove all screws on the main silencer.
-
Take off silencer cap
-
Take off outer tube (D and 0-ring
-
Remove glass fiber yarn filling
-
Clean the parts that need to be reinstalled and check for damage.
-
Fit the new glass fiber yarn filling onto the inner tube.
-
Mount 0-ring
-
Position the inner tube with the connecting cap and glass fiber yarn filling in
the outer tube.
-
Mount 0-ring
-
Position the silencer cap with 0-ring
-
Mount and tighten all of the screws.
Guideline
I
Screws on the main silencer
M00435-10
(FE US)
-
Remove screws
-
Remove connecting cap with the perforated pipe, 0-ring (D, and glass fiber
yarn filling
-
Remove screws
-
Remove screws
-
Remove the insulating pad from the insert.
-
Clean the parts that need to be reinstalled and check for damage.
-
Mount the new insulating pad on the insert and fasten with adhesive tape.
-
Position the insert with the insulating pad in outer tube
Mount and tighten screws
Guideline
I
Screws on the main silencer
-
Mount 0-ring (D on the silencer cap.
-
Fit the new glass fiber yarn filling onto the perforated pipe.
Fit the connecting cap with the glass fiber yarn filling in the outer tube.
• Info
I
Press the glass fiber yarn filling into the outer tube using a blunt tool.
-
Mount and tighten screws
Guideline
I
Screws on the main silencer
-
Mount 0-ring @ on the silencer cap.
-
Position the silencer cap with 0-ring @ in the outer tube.
-
Mount and tighten screws@).
Guideline
I
Screws on the main silencer
Finishing work
-
Install the main silencer.
-
Install the right side cover.
O
and 0-ring @.
C,.
0
from inner tube (D.
C,
onto connecting cap
8
on the silencer cap.
8
O
of connecting cap
C,.
0
and silencer cap (D with 0-ring @.
@) @)
and insert together with insulating pad
@).
I
Q.
I
(il!.!J p. 71)
(� p. 77)
@.
in the outer tube.
I 7 Nm (5.2 lbf ft)
8.
G,!).
41.
MS I 7 Nm (5.2 lbf ft)
MS I 7 Nm (5.2 lbf ft)
I 7 Nm (5.2 lbf ft)
72