Husqvarna FE 350 2015 Repair Manual page 156

ENGINE
18
8 .
Mount lock ring
CD
Press the shaft seal ring
open side facing in.
C,
Press the new bearing all the way in from the inside to the outside using a
suitable tool.
O
Press in shaft seal ring all the way, with the open side facing outward.
0 .
Remove lock ring
(D
Remove shaft seal ring of the crankshaft.
Press the new shaft seal ring all the way in with the open side facing outward.
Info
Provide suitable support for the clutch cover while pressing in.
0 .
Mount lock ring
Blow out the oil channel with compressed air and check that it is clear.
all the way in from the inside to the outside with the
154