Installing The Locking Lever; Installing The Shift Drum Locating Unit; Installing The Shift Shaft; Installing The Clutch Basket - Husqvarna FE 350 2015 Repair Manual

ENGINE
18
18.5.12

Installing the locking lever

18.5.13

Installing the shift drum locating unit

18.5.14

Installing the shift shaft

Installing the clutch basket

18.5.15
O
-
Mount locking lever with the washer, sleeve and spring.
-
Mount and tighten screw
Guideline
Screw, locking lever
-
Push away locking lever
8.
shift drum locating unit
• Info
I
The flat areas of the shift drum locating unit are not symmetric.
Relieve tension from the locking lever.
-
Mount and tighten screw
Guideline
Screw, shift drum locating
O
-
Slide shift shaft with the washer into the bearing seat.
8
-
Push sliding plate away from the shift drum locating unit
shaft all the way.
-
Let the sliding plate engage in the shift drum locating unit.
-
Shift through the transmission.
O
-
Mount collar sleeve and both needle bearings
-
Slide the clutch basket onto the gearbox main shaft. Turn the oil pump gear
until the gear teeth of the clutch basket mesh.
8.
M5 6Nm
(4.4 lbf ft)
O
from the shift drum locating unit and position the
CD.
10 Nm
M6
(7.4 lbf ft)
8.
182
Loctite ® 243
™
Loctite ® 243
™
CD.
Insert the shift
CD