Assembling The Damper - Husqvarna FE 350 2015 Repair Manual

SHOCK ABSORBER, SWINGARM
9
9.23
Assemblin
fD
-
Mount washer with the collar facing downward.
-
Grease the thread of the piston rod.
I
Lubricant (T152) (a p. 286)
@).
-
Mount and tighten nut
I Guideline
Nut, piston rod
Preparatory work
-
Assemble the seal ring retainer.
-
Assemble the piston rod.
Main work
-
Lubricate the O-rings of the compression adjuster.
I
Lubricant (T158) (a p. 286)
-
Lubricate the threads.
I
Lubricant (T159) (a p. 286)
-
Mount the piston with the spring.
-
Mount and tighten the compression adjuster
Guideline
I
Compression adjuster
-
Clamp the damper in a bench vise.
Guideline
I
Use soft jaws.
-
Mount adjusting ring @ with the intermediate washer.
Info
The adjusting ring cannot be mounted after the piston rod is mounted.
-
Fill the damper cartridge about half full.
I
Shock absorber fluid (SAE 2.5) (50180751 S1)
(D
-
Lubricate O-ring of the seal ring retainer.
I
Lubricant (T158) (a p. 286)
-
Mount the piston rod carefully.
I
M16x1
(a p. 55)
(a p. 56)
0-
I
M31x1
(a p. 284)
57
I I
45 Nm (33.2 lbf ft)
I I
45 Nm (33.2 lbf ft)