Husqvarna FE 350 2015 Repair Manual page 200

19
CLUTCH
(FE 350S US)
Inject the liquid into the system until it escapes from openings (3 of the mas­
ter cylinder without bubbles.
Now and then, extract fluid from the master cylinder reservoir to prevent over­
flow.
Remove the bleeding syringe. Mount and tighten screws bleeder screw.
Correct the fluid level of the hydraulic clutch.
I Guideline
Fluid level below container rim
Position the cover with the membrane. Mount and tighten the screws.
14
mm (0.16 in)
198