Engine Assembly; Installing The Crankshaft; Installing The Transmission Shafts - Husqvarna FE 350 2015 Repair Manual

ENGINE
18
-
Mount 6th-gear sliding gear
-
Mount stop disk Gt).
-
Mount needle bearing Ci}.
-
Mount 1st-gear idler gear
-
Mount stop disk Gi).
-
Finally, check all gear wheels for smooth operation.
18.5 Engine assembl�
18.5.1

Installing the crankshaft

18.5.2

Installing the transmission shafts

e
with the shift groove facing downward.
48.
-
Position the right section of the engine case in the engine work stand.
-
Oil the bearing.
-
Push crankshaft
Oil the bearing.
Slide both transmission shafts
-
Mount lock ring fi}.
O
into the bearing seat.
O
into the bearing seats together.
177