Husqvarna FE 350 2015 Repair Manual page 20

6
FORK, TRIPLE CLAMP
-
Clamp the fork leg in the area of the lower triple clamp.
I
Clamping stand (T1403S)
-
Remove the screw. Remove adjuster@).
201700-10
-
Release screw cap
I
Special socket (T14047)
• Info
I
The cartridge cannot be taken off yet.
201701-10
-
Unclamp the fork leg.
-
Push the outer tube down. Drain the fork oil.
-
Clamp the fork leg with the axle clamp.
-
Release hydrostop unit
• Info
I
Do not use an impact wrench.
Place a pan underneath since oil will run out.
-
Remove the cartridge from the fork leg.
I
Press-out tool (T14051)
• Info
I
Removing the O-ring seat from the cartridge usually requires the applica­
tion of force.
-
Remove dust boot (3.
-
Remove fork protection ring f).
• Info
I
The fork protection ring does not necessarily need to be removed for
repair work.
(lit!I p. 298)
8.
(!ill p. 298)
0
and remove it.
(� p. 299)
18