Setting The Characteristic Map Of The Throttle Response - Husqvarna FC 250 Owner's Manual

16.3

Setting the characteristic map of the throttle response

Info
On the throttle grip, the characteristic map of the throttle response is changed by changing the guide
plate.
A guide plate with a different characteristic map is supplied.
Main work
–
Move the handlebar to the straight-ahead position.
–
Push back sleeve
–
2
Loosen nut
ble.
–
4
Loosen nut
–
Push cold start button
–
Turn adjusting screw
to the basic position when the throttle grip is turned to the
front.
–
4
Tighten nut
–
Turn adjusting screw
cable at the throttle grip.
Guideline
Throttle cable play
–
Tighten nut 2
–
Slide on sleeve
S02051-10
tion.
Finishing work
–
Check the play in the throttle cable. (
–
Install the fuel tank.
–
Mount the seat. (
–
Install the air filter box cover. (
–
Install the right side cover. (
Main work
–
Push back sleeve
–
Remove screws
–
Detach the throttle cables and take off the grip tube.
S01964-10
16 TUNING THE ENGINE
1
.
3
. Turn adjusting screw in as far as possi-
.
6
all the way to the stop.
5
so that the cold start button moves
.
3
so that there is play in the throttle
3 ... 5 mm (0.12 ... 0.2 in)
.
1
. Check the throttle grip for smooth opera-
p. 110)
( p. 67)
p. 60)
p. 61)
p. 65)
1
.
2 3
and half-shells .
111