Setting The Characteristic Map Of The Throttle Response - Husqvarna TE 150i 2021 Owner's Manual

17 TUNING THE ENGINE
17.3
126

Setting the characteristic map of the throttle response

Info
On the throttle grip, the characteristic map of the throttle response is changed by changing the guide
plate.
A guide plate with a different characteristic map is supplied.
S03644-10
102246-10
Guideline
Throttle cable play
–
Unscrew adjusting screw
play in the throttle cable worsens.
–
5
Turn adjusting screw
–
4
Tighten nut .
–
2
Tighten nut .
–
1
Slide on sleeve .
–
Check the throttle grip for smooth operation.
Finishing work
–
Check the throttle cable play. (
Main work
–
1
Push back sleeve .
–
2
Remove screws and half-shells
–
Detach the throttle cables and take off the grip tube.
–
4
Remove guide plate
–
Position the required guide plate on the grip tube.
Guideline
The label OUTSIDE must be visible. Marking
B
positioned at marking
Grey guide plate (79002014000)
Alternative 1
Black guide plate (79002014100)
Info
The gray guide plate opens the throttle valve more
slowly.
The black guide plate opens the throttle valve more
quickly.
The gray guide plate is mounted upon delivery.
3 ... 5 mm (0.12 ... 0.2 in)
5
until the smooth operation or
approx. two turns further.
p. 125)
3
.
5
from handle tube .
A
must be
.