Setting The Characteristic Map Of The Throttle Response - Husqvarna TE 250i 2022 Owner's Manual

17.3

Setting the characteristic map of the throttle response

Info
On the throttle grip, the characteristic map of the throttle response is changed by changing the guide
plate.
A guide plate with a different characteristic map is supplied.
Guideline
Play in throttle cable
–
Unscrew the adjusting screw
or play in throttle cable is worsened.
–
Turn adjusting screw
–
4
Tighten nut
–
2
Tighten nut
–
Slide on sleeve
–
Check the throttle grip for smooth operation.
Finishing work
–
Check the play in the throttle cable. (
Main work
–
Push back sleeve
–
Remove screws
–
Detach the throttle cables and take off the grip tube.
S04500-10
–
Remove guide plate
–
Position the required guide plate on the grip tube.
Guideline
The label OUTSIDE must be visible. Marking
positioned at marking
Grey guide plate (79002014000)
Alternative 1
Black guide plate (79002014100)
Info
The gray guide plate opens the throttle valve more
slowly.
The black guide plate opens the throttle valve more
quickly.
The gray guide plate is mounted upon delivery.
102246-10
TUNING THE ENGINE 17
3 ... 5 mm (0.12 ... 0.2 in)
5
until the smooth operation
5
approx. two turns further.
.
.
1
.
p. 124)
1
.
2 3
and half-shells .
4 5
from handle tube
B
.
.
A
must be
125