Making The Contact Closure Connections - Thermo Scientific Surveyor UV Plus Hardware Manual

2
Installation
Making the Back Panel Connections

Making the Contact Closure Connections

Figure 12. 5-connector version of the system interconnect cable
To
MS detector
Figure 13. 7-connector version of the system interconnect cable
To
MS detector
16 Surveyor UV/Vis Plus Detector Hardware Manual
The system interconnect cable coordinates the timing of the Surveyor plus modules during an
injection sequence.
There are two versions of the system interconnect cable (contact closure):
• The older version has five combicon connectors. You can identify the detector connector
by the DET tag on its adjacent cable as shown in
• The newer version has seven combicon connectors, with three connectors labeled
DETECTOR as shown in
M/S
To
autosampler
To
Surveyor MS
Pump Plus
M/S
To
detector
To
autosampler
Figure 13.
F5049-010
A/S
A/S
To
pump
Figure 12.
To
DET
detector
To
Surveyor LC Pump
Plus
To
detector
To
detector
To
pump
Thermo Scientific