Thermo Scientific Surveyor UV Plus Hardware Manual page 2

© 2013 Thermo Fisher Scientific Inc. All rights reserved.
Surveyor, ChromQuest, and Xcalibur are registered trademarks and LightPipe is a trademark of Thermo Fisher
Scientific Inc. in the United States.
The following are registered trademarks in the United States and other countries: Windows is a registered
trademark of Microsoft Corporation. Kel-F is a registered trademark of 3M Company.
PEEK is a trademark of Victrex PLC in the United States and possibly other countries.
All other trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries.
Thermo Fisher Scientific Inc. provides this document to its customers with a product purchase to use in the
product operation. This document is copyright protected and any reproduction of the whole or any part of this
document is strictly prohibited, except with the written authorization of Thermo Fisher Scientific Inc.
The contents of this document are subject to change without notice. All technical information in this
document is for reference purposes only. System configurations and specifications in this document supersede
all previous information received by the purchaser.
This document is not part of any sales contract between Thermo Fisher Scientific Inc. and a purchaser. This
document shall in no way govern or modify any Terms and Conditions of Sale, which Terms and Conditions of
Sale shall govern all conflicting information between the two documents.
Release history: Revision A, Oct 2005; Revision B, Apr 2006; Revision C, Mar 2008; Revision D, Jan 2009;
Revision E, Mar 2011; Revision F, Dec 2013
This revision contains cosmetic changes only. The cosmetic changes include a new title page and chapter icon.
In addition, the pagination might differ slightly from the last revision.
The current converter board firmware for the Surveyor UV/Vis Plus Detector is compatible with these data
systems: ChromQuest versions 4.0 SP1, 4.1 SP2, 4.2, and 5.0 and Xcalibur versions 2.x through 3.x. You can
upload the current firmware with the firmware upgrade utility.
For Research Use Only. Not for use in diagnostic procedures.