Thermo Scientific Surveyor UV Plus Hardware Manual page 3

Thermo Fisher Scientific performs complete testing and evaluation of its products to ensure full compliance with
applicable domestic and international regulations. When the system is delivered to you, it meets all pertinent
electromagnetic compatibility (EMC) and safety standards as described in the next section or sections by product name.
Changes that you make to your system may void compliance with one or more of these EMC and safety standards.
Changes to your system include replacing a part or adding components, options, or peripherals not specifically
authorized and qualified by Thermo Fisher Scientific. To ensure continued compliance with EMC and safety standards,
replacement parts and additional components, options, and peripherals must be ordered from Thermo Fisher Scientific
or one of its authorized representatives.
EMC Directive 89/336/EEC amended by 92/31/EEC and 93/68/EEC
EMC compliance has been evaluated by Underwriters Laboratories Inc.
EN 55011 1998
EN 61000-3-2 1995, A1; 1998, A2; 1998, A14; 2000
IEC 61000-3-2 2000
EN 61000-3-3 1995
IEC 61000-3-3 1994
EN 61326-1 1997
EN 61000-4-2 1995 A1; 1998 A2; 2001
FCC Class A, CFR 47 Part 15 Subpart B: 2003
Low Voltage Safety Compliance
This device complies with Low Voltage Directive EN 61010-1:2001.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Regulatory Compliance
Surveyor UV/Vis Plus Detector
FCC Compliance Statement
EN 61000-4-3 2002
EN 61000-4-4 1995, A1; 2001, A2; 2001
EN 61000-4-5 1995, A1; 2001
EN 61000-4-6 1996, A1; 2001
EN 61000-4-11 1994, A1; 2001
ENV 50204 1995
CISPR 11 1999, A1; 1999, A2; 2002