Thermo Scientific Surveyor UV Plus Hardware Manual page 40

2
Installation
Powering On the Detector for the First Time
24 Surveyor UV/Vis Plus Detector Hardware Manual
When the instrument is powered on, it performs its Start-up diagnostics. After a few seconds,
the LEDs on the front of the detector turn solid green. If one or more LEDs flash green or
amber, or turn solid amber, there might be a problem. The COMM LED remains amber
until the software is started and initiates communication with the detector.
See Chapter 4, "Troubleshooting,"
your Thermo Fisher Scientific Service Representative if you require assistance.
for a complete description of LED status indications. Call
Thermo Scientific