Thermo Scientific Surveyor UV Plus Hardware Manual page 71

Thermo Scientific
Figure 37. Surveyor Firmware Upgrade Utility showing a successful connection to the
Surveyor UV/Vis Plus Detector
7. In the File Names area, select the appropriate firmware files for the Surveyor UV/Vis
Detector as follows:
a. Click Browse to the right of the ROM box, and then select the ROM 1.0.8.bin file.
The file name appears in the ROM box. See
b. Click Browse to the right of the APP1 box, and then select the
APP1_UVVis_1.10.bin file.
The file name appears in the App1 box. See
IMPORTANT You must select both a ROM file and an APP1 file. Your Surveyor
UV/Vis Plus Detector will not work properly if you do not download these files
together.
8. Click Download, and wait for the download to finish.
The utility notifies you when it completes the download (see
download is complete, you can safely close the Surveyor Firmware Upgrade Utility and
turn off the power to the detector.
A
Surveyor Firmware Upgrade Utility
Figure 37.
Figure 37.
Figure 38). Once the
Surveyor UV/Vis Plus Detector Hardware Manual 55