Unpacking And Inspecting The Instrument - Thermo Scientific Surveyor UV Plus Hardware Manual

Unpacking and Inspecting the Instrument

Thermo Scientific
Carefully remove the detector from the shipping container and inspect both the detector and
the packaging for any signs of damage. If you find any damage, save the shipping materials
and immediately contact the shipping company.
Verify that the shipping container contains these items:
• Surveyor UV/Vis Plus Detector
• Accessory kit (P/N 60053-62004)
Detectors ordered with a standard 10 mm flow cell arrive with the flow cell installed in the
detector. Detectors ordered with a 50 mm LightPipe flow cell arrive with the LightPipe flow
cell packaged in the accessory kit.
Table 2 lists the contents of the accessory kit. Carefully check to make sure you have received
all the items listed on the packing list. If any items are missing, contact your Thermo Fisher
Scientific representative immediately.
Table 2. Surveyor UV/Vis accessory kit
Description
Cable, Ext. Run/Auto Zero
8-pin cable connector, 3.81 mm pitch, minicombicon
Cable, RJ45 Ethernet communication, CAT-5, shielded
Cable, analog, shielded, detector
Nut, 1/16 in., 1/4-28 threads
Ferrule, 1/4-28 threads,
material: ethylene tetrafluoroethylene (ETFE)
Nut and Ferrule set tube
LC Test Mix, 1 mL
Funnel, Surveyor
Tubing, convoluted, detector drain
Screwdriver, Hex, ball end, 3/32 in., black
Screwdriver, Hex, ball end, 1/8 in., black
Screwdriver, Hex, ball end, 9/64 in., black
Unpacking and Inspecting the Instrument
Quantity
1
2
1
2
2
2
1
1
1
1
1
1
1
Surveyor UV/Vis Plus Detector Hardware Manual
2
Installation
Part number
6040-0102
00004-02511
70111-63302
6040-0103
3256-0024
3256-0025
3256-0022
A3469-020
F3012-010
F5034-010
00725-00040
00725-00042
00725-00044
11