Advertisement
Introduction
The implement described in this manual has been
designed with care and built by skilled workers using
quality materials and processes. Proper assembly and
maintenance will provide you with satisfactory use for
seasons to come.
DANGER
DANGER
Read this entire manual before attempting to
assemble, adjust or operate this implement.
Failure to comply with this warning can result in
personal injury or death, damage to the implement
or its components and inferior operation.
Description of Unit
Brillion WL Pulvi-Mulcher models provide the ultimate in
high capacity seedbed preparation. The front rollers of
the Pulvi-Mulcher break up surface clods. "C" shaped
ribbon teeth or "S" spring tines loosen the soil up to 6" in
depth and pull clods to the surface. The rear roller wheels
then crush those clods and convert the soil into a firmed,
mulched seedbed that locks in moisture at the root level.
Using this Manual
This manual will familiarize you with safety, assembly,
operation, adjustment, and maintenance. Read this
manual and follow the recommendations to help ensure
safe and efficient operation.
•
The information in this manual is current at time of
printing. Some parts may have changed to assure top
performance.
•
Location reference: Right and Left designations in this
manual are determined by facing the direction the
implement will travel during field operation, unless
otherwise stated.
9J577-0822
TABLE OF CONTENTS
Owner Assistance
If customer service or repairs are needed, contact your
Brillion dealer. They have trained personnel, parts and
service equipment specially designed for Brillion
products. Your implement's parts should only be
replaced with Brillion parts. If items covered in this
manual are not understood, contact your local Brillion
Dealer.
Warranty Registration
Brillion Farm Equipment, by Landoll, shall have no
warranty obligation unless each product is registered,
within 10 days of retail purchase, using the Landoll
Company, LLC Ag Products on-line registration process.
Please refer to the Ag Products Policy and Procedures
Manual, accessible at
instructions regarding product registration.
Enter your product information below for quick reference.
Refer to the ID plate as shown. See Figure 1-1.
MODEL NUMBER
SERIAL NUMBER
DATE OF PURCHASE
MODEL #
SERIAL #
MADE IN USA
Chapter 1
Safety Information
www.landoll.com
Landoll Company, LLC
Marysville, Kansas
www.landoll.com
Figure 1-1: ID Plate
for step by step
1-573-010006
1-1
Advertisement
