Advertisement
Wing Frame Tooth Locations
1. Assemble all brackets and pencil mark the tooth
locations on the tooth tubes. Measure each of the
tooth tubes for proper placement of each tube.
2. Slide the tooth tubes through the Tooth Tube
Brackets. See Figure 2-20.
Clamp
Strap
Tooth Tube
Bracket
Clamp
Strap
Tooth Tube
Bracket
9J577-0822
TABLE OF CONTENTS
3. Fix the tooth tubes in place by assembling Clamp
Wing Tooth Locations
View from the Top
Figure 2-20: Wing Frame Tooth Locations
Straps on the outside of each front tooth tube bracket
and on the inside of each rear tooth tube bracket.
Secure with 1/2-13 U-bolts, Lock Washers and Nuts.
See Figure 2-11.
WL360 OpWingToothLoc
Front
Hinge
Clamp
Strap
Tube
Tooth Tube
Bearing
Clamp
Strap
Tube
Tooth Tube
Bracket
Rear
Hinge
2-21
Advertisement
