Advertisement
Tooth or Tine Installation
1. Assemble all brackets and pencil mark the tooth
locations on the tooth tubes. Measure each of the
tooth tubes for proper placement of each tube.
2. Slide the tooth tubes through the Tooth Tube
Brackets from their respective sides and position such
that the left and right tubes meet in the center of the
Center Tooth Tube Bracket. See Figure 2-12.
3. Fix the tooth tubes in place by assembling Clamp
Straps on the inside of the each outer Tooth Tube
Bracket. Secure with 1/2-13 U-Bolts, Lock Washers
and Nuts. See Figure 2-11.
Tooth Tube
Bracket
Nut,1/2-13
Lock Washer,1/2
Clamp Strap
U-Bolt,1/2-13
2-12
TABLE OF CONTENTS
Tube
Tooth Tube
Bracket
Nut,1/2-13
Lock Washer,1/2
U-Bolt,1/2-13
Figure 2-11: Fixing the Tubes in Place
Clamp Strap
Tube
9J577-0822
Advertisement
