Advertisement
Land Leveler Installation -
Optional
Refer to Figure 2-44 for Land Leveler mounting
dimensions.
1. Attach the Left and Right Hand Brackets to the Front
Center Frame Tube and Wing Frame Tube using
1/2-13 U-Bolts, Lock Washers and Nuts. When the
bracket is in position, left and right hand is determined
by which side of the bracket the arm projects from.
See Figure 2-45.
Bracket RH
3J551
Leveler
Angle
3J559
Angle RH
3J556
RH Outer
Frame Tube
Bracket RH
Angle LH
3J557
Leveler
Angle
3J560
Angle RH
3J556
1-7/8"
15-1/8"
31-1/8"
2-46
TABLE OF CONTENTS
RH Wing
Bracket LH
Frame
3J552
Angle RH
3J556
LH Outer
Frame Tube
4-1/4"
Center Frame
Front Tube
Angle LH
Bracket LH
3J557
3J551
36-1/8"
Figure 2-43: Land Leveler Mounting Dimensions - Optional
2. Attach the Left and Right Hand Adjustment Angles to
the Brackets with 1/2-13 x 1-1/2 Bolts, Lock Washers
and Nuts. The hoses mounted on the front of the wing
tube may need to be moved and tied down with a
cable tie to allow proper mounting of brackets. Do not
tighten at this time.
3. Attach the Center and Wing Levelers onto the
Adjustment Angles to the highest position that does
the required job. Secure with 1/2-13 x 1-1/2 Bolts,
Lock Washers and Nuts. Tighten all fasteners.
NOTE
If the soil pushes ahead of the bar it is set too low.
RH Outer
Frame Tube
4-1/4"
LH Wing
Bracket RH
Frame
3J551
Angle LH
3J557
Bracket RH
3J551
Angle RH
3J552
3J556
36-1/8"
NOTE: All views are from the Top
Bracket LH
3J552
Leveler
Angle LH
3J557
LH Outer
Frame Tube
Bracket LH
3J552
Angle LH
3J557
30-5/8"
15-5/8"
Angle
3J559
Angle RH
3J556
Leveler
Angle
3J560
1-7/8"
9J577-0822
Advertisement
