Advertisement
CAUTION
Do not work on or under this machine unless
securely blocked and supported by a hoist or
tractor or by other sufficient means!
WARNING
Do not attempt to lift heavy parts (such as the
frame, rock shaft, and pull hitch) manually. Use a
hoist or a fork lift to move these parts into
position.
The intent of this chapter is to provide instruction,
allowing you to safely and correctly assemble your
Brillion product.
NOTE
Refer to the repair parts manual 9J578 for identification
of parts and for the approximate relationship of the parts
in assembly.
IMPORTANT
•
If a pre-assembled component or fastener is
temporarily removed, ensure it is correctly re-installed
per these instructions.
•
Check that all working parts move freely, bolts are
tight and cotter pins are spread.
•
Refer to the Torque Table for proper torque valves.
Note the different torque requirements for bolts with
lock nuts. See Page 4-1.
"Left" and "Right" refer to directions seen as if standing
behind the machine and facing in the direction of forward
travel.
9J577-0822
TABLE OF CONTENTS
Chapter 2
Assembly
2-1
Advertisement
